Industrial Automation & Engineering Components
Used for suction/discharge fluid between a hydraulic cylinder and a tank
The check valve opens when the pressure reaches the cracking pressure, allowing fluid to flow only in one direction.
Installed in a hydraulic line perpendicular to the line, the check valve opens when the pressure reaches the cracking pressure, allowing fluid to flow only in one direction and blocking the flow in the reverse direction.
Installed in a hydraulic line parallel to the line, the check valve opens when the pressure reaches the cracking pressure, allowing fluid to flow only in one direction and blocking the flow in the reverse direction.
Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 700 L/min.
Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 300 L/min.
Adoption of the shockless spool enables smooth reversal and stopping of the load.
The capability to switch the valve with a minute signal current (approximately 10 mA) enables direct drive from a programmable sequence controller.
Realize high-pressure large-flow-rate control at 35 MPa and 100 L (G02) or 160 L/min (G03)
Copyright © 2022 PT Eterna Karya Sejahtera