Products

The linear position sensor indicates the absolute actual position of the TOX®-Powerpackage working piston. The measuring system works contactless and therefore it is free of wear, insensitive to dirt and interferences.

The ZHU is a sensor that detects the stroke of the permanent magnet attached to the working piston. A special cylinder barrel is necessary as well as holding fixtures.

The coupling ZWK is threaded directly on the working rod of the TOX®-Powerpackage. This coupling provides a flexible connection between the TOX®-Powerpackage and the die set, thereby preventing any side loads. This accessory includes an anti-rotation device.

The tool holding fixture can be mounted to the working rod of the TOX®-Powerpackage. The guide bushing in the press frame provides the anti-rotation.

The ram guide includes the coupling ZWK with is mounted to the working rod of the TOX®-Powerpackage. Two bushings in the press frame guarantee the guidance.

The oil level monitor measures the oil level inside the TOX®-Powerpackage. If the minimum level is reached, the indicator pin actuates a switch (pneumatic or electric). Mounted via steel strip. With manual reset.

The front mounting plate ZFV is retrofittable, for TOX®-Powerpackages type S / AT. The rear mounting plate ZFH is non-retrofittable. It is used for TOX®-Powerpackages with larger intensifier section A2 > A.

The rear spherical bearing mount ZGH is non-retrofittable. It is used for TOX®-Powerpackages with larger intensifier sections A2 > A.