The Air Pincette, incorporating a Vacuum Pad and Vacuum Generator in the pen-shaped body, serves well in the assembly operation of small parts.
Vacuum pad equipped with vacuum generator and cylinder. By simply supplying compressed air, the work-piece is sucked and the slide shaft is lifted by vacuum.
Multi-stage nozzle ejector with stackable construction, ensuring a high vacuum of -94 kPa and a large suction flow of up to 1,110 l/min[ANR]. Securing high vacuum and large flow rate. By adoption of multi-stage nozzle and multi-layer structure, suction flow can be secured approx. 2.2times(on average) larger than air consumption.
PISCO offers new pressure reducing valve. The pressure setting is factory set and cannot be changed or adjusted, which provides operators safe and continuous performance. The pre-set regulator provides a stable pressure point, even when the inlet pressure fluctuates. A reverse flow mechanism allows installation between solenoid valves and cylinders. It is compact and light-weighted. The factory pressure set is from 0.2 to 0.6MPa (29 to 87psi), every 0.05MPa (every 7psi)
Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best suited for use with mass-produced, dedicated machines.
Orifice bore:Selectable from φ0.1mm to φ2.0mm in increment of 0.1mm. Can be installed in tight space. M5x0.8 thread is introduced in mini type fitting that makes compact piping possible.
Copyright © 2022 PT Eterna Karya Sejahtera