LS-G02 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

LS-G03 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

Realize high-pressure large-flow-rate control at 35 MPa and 100 L (G02) or 160 L/min (G03)

The capability to switch the valve with a minute signal current (approximately 10 mA) enables direct drive from a programmable sequence controller.

Adoption of the shockless spool enables smooth reversal and stopping of the load.

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 300 L/min.

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 700 L/min.

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 1100 L/min.

The highly reliable KSO－G02 adopted as the pilot valve ensures long service life and stable operation. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

Using these valves in combination with a pressure compensation valve (MUV, MDM) achieves flow rate characteristics with pressure compensation according to the adjustment made with the flow rate adjusting screw.

JP valve enables switching of the direction of flow of the fluid by operating the spool with the hydraulic pilot valve.

No hydraulic locking occurs even during long periods of pressurized operation.

Explosion-proof solenoid operated valve with a terminal box which have a special structure that essentially internally isolates ignition sources, such as those at electrical connections, so that if explosive gases enter from the outside and ignite and explode inside, they will not adversely affect the outside.

DM04 valve enables switching of the direction of flow of the fluid by operating the spool with the manual operation lever. The handle can be operated easily even at a high pressure.

JM valve enables switching of the direction of flow of the fluid by operating the spool with the manual operation lever. Enables construction of a wide variety of circuits in combination with 02 size stack valves.

Compact directional control valves using a rotary spool available in two models, one dedicated to manual operation and the other with a dog for cam operation (manual operation also possible). The structure has a high level of pressure balance, which suppresses the variation in the force required to operate the handle according to the pressure change.

Enables acceleration/deceleration of a cylinder by adjusting the plunger stroke with a cam mechanism.

DD2 is a 2-position, 2-way valve which enables switching of the fluid passage in a hydraulic pilot circuit or interlocking circuit using cam operation. Compact and lightweight designs are ideal for automatic operation.