CP611LU　Standard type　Oilless enclosed cylinder（Bore size：φ40～φ100）; CP665　Standard type　Oilless enclosed cylinder（Bore size：φ125～φ500）

MP665　Oilless enclosed cylinders with solenoid valve（Bore size：φ125～φ250）

Oilless enclosed cylinder based on CP665 with reed switch for detecting stroke position. This cylinder boasts high adaptability regardless of loads or operational environment.; SP665　Oilless enclosed cylinders with reed switch（Bore size：φ125～φ200）

MS665　Oilless enclosed cylinders with 5-port solenoid valve and reed switch（Bore size：φ125～φ200）

Heavy duty type pneumatic cylinder with high rigidity and outstanding durability that ensure secure operation even in serious environment.

Designed based on CP61 cylinders for long-stroke application,CP691 series boast high rigidity with excellent reliability and proven performance.

Corrosion-resistant pneumatic cylinder based on CP611 with stainless steel external materials.

Double rod cylinder designed based on CP611 pneumatic cylinder.

This CP611-based general purpose pneumatic cylinder with adjustable stroke is available in 2 types: AD type adjusts stroke at rod "IN" and AR type at rod "OUT".

Heavy duty pneumatic cylinder based on CP611S2 with flangewelded cylinder tube.

CP665　Standard oilless enclosed type（Bore size：φ40～φ100）

Double rod cylinder designed based on CP665 pneumatic cylinder.

CP665 oilless enclosed cylinder with directly mounted 5-port solenoid valve. This design enables easier piping and reduction in air consumption, thus lowering costs.

Oilless enclosed cylinder based on CP665 with reed switch for detecting stroke position. This cylinder boasts high adaptability regardless of loads or operational environment.

Bore size：12.7mm(1/2")～101.6mm(4"); Space needed for installation is only half that of rod cylinders. 　Problem of bending due to heavy rod can be solved.

Bore size：19.1mm(3/4")～50.8mm(2"); Pneumatic cylinder that returns by gravity. SA series are suitable for load lifting applications. The cylinder supplies pressure only at lifting up a load.; Installation of the cylinder can be horizontal, perpendicular, or slope.

Bore size：38.1mm(1 1/2")～50.8mm(2"); Load can be traveled double the length of cylinder stroke.; Ensures further space-saving compared to standard type.

Bore size：12.7mm(1/2")～38.1mm(1 1/2"); TC series cable cylinders with tracking rail have linear bearing at load mounting block.It runs on the quenched ground shaft.

Automatic tensioner always gives certain degree of tension to the cable. As good relationship between cable and ground seal are maintained, longer seal life is guaranteed. No bending due to stretched cable occurs, minimizing wearing of cable.

As piston incorporating magnet comes closer to reed switch, contact is closed and switch turns ON. Suitable for operation check, detection, and interlock as a controller of sequencer or computer. Can be mounted on a cylinder with automatic tensioner and tracking rail.

Bore size：φ12,φ25,φ32,φ40,φ50,φ63）