Products

The oil level monitor measures the oil level inside the TOX®-Powerpackage. If the minimum level is reached, the indicator pin actuates a switch (pneumatic or electric). Mounted via steel strip. With manual reset.

The front mounting plate ZFV is retrofittable, for TOX®-Powerpackages type S / AT. The rear mounting plate ZFH is non-retrofittable. It is used for TOX®-Powerpackages with larger intensifier section A2 > A.

The rear spherical bearing mount ZGH is non-retrofittable. It is used for TOX®-Powerpackages with larger intensifier sections A2 > A.

The front spherical rod end ZGK is retrofittable. Attention: The rod end must be screwed securely against the shoulder on the working piston. Length compensation over the thread is not permissible.

The ZDO measures the oil pressure in the high-pressure chamber of the TOX®-Powerpackage and displays the value on a 4-digit LED display. Available as a version with two digital outputs or with one digital / one analog output.

The press force sensor ZPS can be mounted directly on the working piston of the TOX®-Powerpackage. It is possible to measure the press forces in a push and pull direction. The sensor is sealed against dirt and moisture and should be installed with the anti-rotation device ZPSV, to avoid damage to the connection cable.