The most standard Speed Control Valve for driving devices.

Speed Controller Large-Flow type. Large-flow type Speed Controller for driving device. Elbow (JSC Series)

Speed Controller Low-Flow type. Low-flow type Speed Controller for driving device.

Recessed Screw Flow Control Valve. It prevents unnecessary manual adjustments during the operations.

2-stage Speed Controller. It enables same control as the cylinder with shock absorber.

Speed Controller PP. PP (Polypropylene) is applied for the body material to adapt to clean environment. Elbow (PJSC Series), Elbow Low Cracking Pressure Type (PJSC Series), Small Union Straight (PJSMU Series)

Speed Controller Spatter. A fire-resistant resin (Equivalent to UL V-0) is applied for the body material to adapt to spatter environment.

Speed controller Push-lock type with Indicator. Speed setting can be checked with indicator. Easy adjustment due to its liner characteristics. Elbow (JSGC Series), Elbow Low-FLow Type (JSGC Series), Universal (JSGS Series)<Universal Low Flow Type (JSGS Series), Union Straight (JSGU Series), Union Straight Low-FLow Type (JSGU Series)

Speed Control Valve SUS316 Stainless Steel. Flow control valve made of stainless steel SUS316 which has excellent anti-corrosivity. Elbow (SSJSC Series)

Speed Controller SUS303 like corrosivity. Best suitable for operating where strength is required or in corrosive atmosphere. Elbow (SJSC Series)

Speed Controller Brass. Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments. Elbow with / without Cover (KJSC Series)

Constant Flow Speed Controller. This speed controller fixes the operation speed of driving device. It is best suited for use with mass-produced dedicated machines. Straight (JKC Series), Elbow (JKL Series)

Throttle (Needle) Valve. Throttle valve controls the operation speed of a pneumatic device and the transmission of air pressure signals. Elbow (JNC Series), Free (JSN Series), Small Union Straight (JNMU Series)

Needle Valve SUS316 Stainless Steel. Needle valve made of stainless steel SUS316 which has excellent anti-corrosivity. Elbow (SSJNC Series)

The pre-set regulator provides a stable pressure point, even when the inlet pressure fluctuates. A reverse flow mechanism allows installation between solenoid valves and cylinders. It is compact and light-weighted. The factory pressure set is from 0.2 to 0.6MPa (29 to 87psi), every 0.05MPa (every 7psi)

Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion.

Fluororesin Needle Valve. Suitable for flow rate adjustment in semiconductor manufacturing process. Union Straight (F-JHAW Series), Union Elbow (F-JHA)

Throttle (Needle)Valve PP. PP (Polypropylene) is applied for the body material to adapt to clean environment. Elbow (PJNC Series), Small Union Straight (PJNMU Series)

Throttle (Needle)Valve Brass. Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments. Elbow with / without Cover (KJNC Series)

Quick Exhaust Valve. Best suitable for high-speed drive cylinder. Intake & Exhaust port: Push-in Fitting, Output port: Thread Tube Exhaust (EQ Series), Intake port: Thread, Output & Exhaust port: Push-in Fitting Tube Exhaust (EQ Series), Intak Port: Push-in Fitting, Output Port: Thread, Exhaust PortL Exhaust Throttle (EQ Series), Union Straight Exhaust to Air (EQU Series), Union Straight Tube Exhaust (EQY Series), Union Straight Exhaust Throttle to Air (EQE Series), Plug-in Open to Air Exhaust (EQJ Series), Cylinder Direct Attachment with Exhaust Female Thread (EQH Series), Cylinder Direct Attachment with Exhaust Throttle (EQH Series)

Exhaust Port Needle Valve (Speed Control Mufflers). This Exhaust Needle Valve controls the exhaust flow rate. Exhaust Throtle (Needle) Valve (ET Series)

Orifice Fittings (Tamper-Proof). Push-in fitting type fixed orifice joint. It controls air flow. Straight (PC Series), Straight Mini (PC Mini Series), Elbow (PL Series), Elbow Mini (PL Mini Series)

Push-Lock Pressure Regulator with Gauge Option. Elbow (RVCP Series), Right Angle Type with Gauge (RVCMP Series), Union (RVUP Series), Inline Type with Gauge (RVUMP Series)

For applications of tamper-proof or that no pressure adjustment is needed. Pre-set Pressure Regulator (RVFUP Series)

Pressure control valve saves compressed air consumption. Elbow (JPC Series), Straight (JPS Series)

Check Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. Straight (CVC Series), Straight Resin Type (CVPC Series), Union Straight Resin Type (CVPU Series), Unequal Union Straight (CVG Series), Bush (CVF Series), Bush - Poppet: Resin (CVPF Series)

Check Valve PP is applicable to water (Fluid). PP (Polypropylene) is applied for the body material to adapt to clean environment.

Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. Taper Thread Type (SR Series), Metric Thread Type (SM Series), Push-IN Fitting Type (ST Series)